|
The HP9000 rp3410 Server can run one or two PA-8800 800MHz processors, supports up to 6 GB of memory, can hold up to 3 hot-plug SCSI disks (438GB maximum), and has 2 full-length, 64bit/133MHz PCI-X Slots. The rp3410 supports HP-UX 11i v1 and HP-UX 11i v2.
For a custom quote on a specific configuration or for a price on an upgrade part, just click  or call us at 800-541-6788.
If you need to add to or upgrade your system, we can readily provide you with the following HP9000 rp3410 Server parts: HP 9000 Servers - HP 9000 rp3410 Server parts:
A7136A, HP 9000 rp3410-2 server (2-way capable) with one PA-8800 800MHz cpu
and 512MB memory HP-UX 11i v1 Factory-installed components
A7136B, HP 9000 rp3410-2 server (2-way capable) with one PA-8800 800MHz cpu,
HP-UX 11i v1 Factory-installed components, no memory included
A6981A, 36GB hot-plug Ultra320 LVD SCSI hard drive - 15,000 RPM, low profile
A6985A, Slimline DVD-ROM drive (Gray) - 8X DVD-ROM read, 24X CD-ROM read
A6986A, Slimline DVD-ROM/CD-RW drive (Gray) - 12X CD-R write, 8X CD-RW re-write,
24X CD-ROM read, 8X DVD-ROM read
A5159B, Dual channel Fast Wide Differential SCSI adapter board
A5506B, 100Base-TX LAN four port host adapter
A6828A, Single channel Ultra160 LVD SCSI adapter board
A6829A, Dual channel Ultra160 LVD SCSI adapter board
A6847A, 1000Base-SX Gigabit Ethernet network interface adapter board
A6875A, Management processor board
A8685A, 1000Base-T Gigabit Ethernet network interface adapter board
A7840A, 512MB DDR-SDRAM memory upgrade kit (2 x 256MB DIMM)
A7841A, 1.0GB DDR-SDRAM memory upgrade (2 x 512MB DIMM)
A7842A, 2.0GB DDR-SDRAM memory upgrade kit (2 x 1GB DIMM)
A6874A, Hot-swap redundant power supply - 650W
A7138A, 800MHz PA-RISC 8800 dual core processor and attached heat sink with fan
AB354A, 1.0GHz PA-RISC 8800 dual core processor and attached heat sink with fan
A8694A, Rackmount kit
For a custom quote on a specific configuration or for a price on an upgrade part, just click or call us at 800-541-6788.
|
800.541.6788 
sales@trinicomp.com